Advanced Environmental Solutions, INC.

DrainGuard™ Catchbasin Filter Inserts

Keep Sediment And Other Pollutants From Entering The Water System With DrainGuard Catch Basin Inserts

Stormwater pollution has become a major concern both locally and on a national level. DrainGuards remove waste from stormwater before it can become a problem in the water system. Simple and effective, these inserts can save $1,000's compared to expensive treatment processes or capital intensive equipment. Designed to fit most standard catchbasins, the DrainGuard can be installed and removed in minutes without any tools. Hydraulic bypass overflow ports help eliminate back up. Three different models adapt to your specific needs while meeting Non-Point Source Storm Water Pollutant Reduction Regulations.

Available in Three Models:

Oil and Sediment Model - Part #: 11091u
Sediment Only Model - Part #: 11090u

Trash and Debris Model - Part #: 11089u

Click For Larger Image	Click For Larger Image	Click For Larger Image	Click For Larger Image
Installation is easily accomplished in just a few minutes	Step 1 - Remove Grate.	Step 2 - Insert DrainGuard.	Step 3 - Replace Grate. Trim excess material if desired.

Designed For Practical Use In:

Industrial Facilities - keep oil and other contaminants from entering storm drains.
Construction Sites - tubular design captures eroded soil and wind-blown debris.
Parking Lots, "Drive-Up" Retail Facilities - polypropylene geotextiles collect oil, fuel and other contaminants that drip from cars.

Unique PopUp Capacity Indicator* Automatically Signals When It's Time To Install A New DrainGuard

Click For Larger Image	Click For Larger Image	Click For Larger Image
Heavy duty magnet securely attaches the reusable indicator to the bottom of the grate.	A tether is attached to a release hook which disengages when the DrainGuard has reached its capacity.	The bright red end cap "pops up" through the grate to visually alert maintenance personnel that the DrainGuard need to be emptied or replaced. The spring-loaded device can be driven over even in the "popped up" position.
Click For Larger Image	Click For Larger Image	Click For Larger Image
The Oil and Sediment Model contains a replaceable oil absorbent pillow that removes oil and grease from water flow as it passes through the DrainGuard. Choose the non-leaching Rubber Particulate Pillow or the highly absorbent Polypropylene Pillow.	The Trash and Debris Model is designed specifically to catch larger items such as cigarette butts, candy wrappers and paper goods.	The Sediment Only Model removes dirt, sand and other sediment from stormwater. Ideal for a construction site sediment control.
* Note: The PopUp Capacity Indicator is not designed for use with the Trash and Debris Model. U.S. Patent No. 5,372,714; 5,575,925

SPECIFICATIONS
	Oil and Sediment Model	Sediment Only Model	Trash and Debris Model
Part #:	9225-Rubber Particulate Pillow (1-Pack) 9224-Rubber Particulate Pillow (10-Pack) 9222-Polypropylene Pillow (1-Pack) 9221-Polypropylene Pillow (10-Pack)	9226 - 1-Pack 9228 - 10-Pack	9227 - 1-Pack 9229 - 10-Pack
Fabric Weight:	8.0 oz / yd²	8.0 oz / yd²	Not Applicable
Thickness:	145 mil.	145 mil.	Not Applicable
Water Flow Rate:	120 gpm / ft²*	120 gpm / ft²*	Not Applicable
Permeability:	.5 cm / sec	.5 cm / sec	Not Applicable
Dimensions:	48" L x 36" W x 23" H	48" L x 36" W x 23" H	48" L x 36" W x 18" H
Weight:	2 lbs.	1 lbs.	1 lbs.
Options:	Replacement Rubber Particulate Pillow (case of 10) Part #9233 Replacement Polypropylene Pillow (case of 10) Part #9223	None	None
Accessories	PopUp Capacity Indicator (Part #9236), Grate Lifting Hook (Part #9235)
	* The total water flow rate through the insert in new condition is in excess of 500 gpm. The overflow rate is approximately 250 gpm.

Please click here to request complete product and pricing information.

Home w Catalog