The Cyclonator A self-contained system that captures and reclaims pressure wash water.
The Cyclonator pressure washer		The Cyclonator wash rack with optional   overspray walls.

     The Cyclonator is a high pressure wash system complete with wash racks, a water reclamation system, and a fresh water holding tank.  It provides a cost effective means for cleaning small and large equipment while preventing ground and stormwater contamination by capturing and reduces water and disposal costs by reclaiming the washwater. Each Cyclonator wash rack module is water tight and seals tightly to adjoining racks to prevent gaps in containment.  Easy to use both in and outdoors, the Cyclonator is both modular and portable and can be easily expanded from 6' X 6' to 30' X 60'.  The Cyclonator requires no special plumbing or digging and the set-up and breakdown takes less than an hour! 

The Cyclonator includes:

• Wash Rack Module (s):
  - 6' 6' rack with the capacity of 10,000 lb
  - Two 3'X 3' steel ramps

• Filtration System:
  - Oil skimmer
  - Powder coated multi-compartment steel filtration chamber
  - Clarifying chamber
  - Ozone injection
  - Continuous recirculation from holding tank
  - One high capacity oil absorbing filter
  - Three high capacity oil absorbing cartridges

• Fresh Water Holding Tank:
  - 300 gallon polypropylene cone bottom tank with stand
  
  
• Additional Options:
  - Carbon filters
  - Over spray walls
  - Ultra, nano and hyperfiltration water purification systems
  -  Wastewater evaporations systems
  - 25,000 lb capacity racks
  - Stainless steel filtration chamber and components                                                                                                                                         

    To Operate:

     Objects to be washed are either placed or driven onto the Cyclonator racks.  Water first enters the filtration chamber through a large steel removable strainer located next to a stainless steel oil skimmer and a waste oil holding reservoir.  From this first chamber, the effluent water is forced under an oil-trapping wall and up over a cascading wall to remove free oils and coarse solids.  From the oil/solids separator, the water flows into a clarifier that efficiently removes particulate.  Water is then pumped from the clarifying chamber through filters removing contaminates down to 1 micron or approximately 1/50th the diameter of the human hair!  After passing through the filters, the water travels into the 300 gallon holding tank which feeds the pressure washer, completing the loop. 
     To control algae and bacteria, ozone exposure is injected into the treated water.    Therefore, the system continuously recirculates water from the holding tank back to the oil-skimming chamber ensuring consistent ozone exposure to all system water.  In addition to spreading ozone through the system, the recirculation function also continuously filters the water in the system.    

     Suggested Uses:

Please click here to request complete product and pricing information.

Home w Catalog

©2000 Advanced Environmental Solutions, Inc. All Rights Reserved. 800-275-3549